Quality, performance, flexibility

Made for quality conscious for 4-up commercial printers with plate sizes up to 800 x 660 mm (31.5 x 26 in). It is available with either a thermal or U.V. imaging head and supports both chemistry-free “develop on press” and wet processing plate types. Thermal and U.V. processing speeds are comparable, but the imaging head can be configured with either 24, 32, or 48 laser channels depending on performance requirements. Plates are fed manually and returned to the operator at the point of load. 

The Accelero uses a single optimized resolution, usually 2400 dpi. Output speed is determined by the number of laser channels, the plate size and resolution, but as a guide, at 2400 dpi, using the maximum sized plate the Accelero will produce between 15 and 26 maximum size plates an hour depending on the number of laser channels. 

ACCELERO 400 
Commercial printing

Imaging method
Thermal or UV laser diode array, external drum
Imaging head
24 – 48 channels
Max plate size
800 x 660 mm (31.5 x 26 in)
Min plate size
400 x 300 mm (15.75 x 11.8 in)
Max Imaging size
800 x 646 mm (31.5 x 25.4 in)
Plate thickness
0.15mm – 0.3mm 
Plate load
Manual
Plate de-loading
Manual
Output speed
Max. plate at 2400 dpi (24 - 48 channels) 18 to 26 plates an hour
Min. plate at 2400 dpi (24 - 48 channels) 25 to 43 plates an hour    
Lighting
Daylight or white light operation
Resolutions
1200 or 2400 dpi
Repeatability 
± 5µm 
Power
Single phase: 200-240V. Power 4KW
Environmental
Recommended: 21-25°C. Allowed 18-26°C. Humidity 40-70% non-condensing
Size
1,900 x 1,200 x 1,000 mm (74.8 x 47.2 x 39.4 in.) (W x D x H)
Weight
800 Kg (1760 lbs)